FAQ
The software version display indicates a weak battery. Remove the batteries, wait for the display to go out, insert new alkaline batteries and turn on the device.
AURATON Tucana
We try to reduce paper consumption as much as possible, which is why only short manuals are included with our devices. Full manuals can be found at: https://manuals.auraton.pl/en/
Yes. The Fornax receiver is a 100% replacement for the old RTH receiver.
On the Fornax receiver: press the right pairing button for at least 3 seconds until the LED flashes green. On the controller, press the pairing button (PROG) until the transmitting symbol lights up on the display. Release the button.
You can use actuators from other manufacturers, provided they are the same type as Auraton actuators. Remember, however, that only with AURATON Vela actuators you have a 10-year warranty on AURATON underfloor heating strips.
NC - normally closed.
Recommended cable is 2x0.5 or 2x0.75.
Solution 1: Watch a short video prepared by our service and follow the scenario youtube.com
Solution 2: See the extended manual: manuals.auraton.pl/en/smart-home-2/
Characteristics :
LibraDS – 47 kOhm/25°C,
LibraP – 10 kOhm/25°C,
3013P – 10 kOhm/25°C,
TucanaP (5m) – 47 kOhm/25°C,
TucanaP (40m) – 10 kOhm/25°C,
Hydrus/Hydra/Ursa – 100 kOhm
NTC/25°C, S03 – 100 kOhm/25°C,
Volans/1107 – 100 kOhm/25°C,
Pictor DS – 10 kOhm/25°C.
After replacing the battery, you need to set the current time and day of the week again. The rest of the settings remain saved.
Aquarius CR allows you to add up to 20 Aquarius PIR motion sensors.
The thermostat configuration settings allow you to calibrate the temperature (offset) readings with a tolerance of +/- 3°C.
In the thermostat configuration settings, the clock calibration allows the clock to be corrected if it deviates by 294 seconds over a 7-day period, both forward and backward.
Auraton Pictor DS and AURATON 2YA.
One thermostat can be paired with any number of underfloor heating strip zones. This is used, for example, when one room has several underfloor heating zones and one thermostat is enough to control the heating in that room.
No. Only devices from the AURATON Smart line work with each other and with the Auraton Smart App.
No. Wireless devices from the standard AURATON product line work with the AURATON Fornax receiver. There is no possibility of remote control of devices via the Internet.
AURATON Smart is a closed system. Only devices from the AURATON Smart line work with each other and with the Auraton Smart App. However, AURATON is working on the new line that will work with SUPLA. Keep checking the updates!
No. The temperature controller that works with the Tuya and Smart Life apps is AURATON 2YA.
